12425 - Established June, 2013 - all GRiSO, all the time...
 
HomeFAQRegisterLog in

Share | 
 

 Part number please

View previous topic View next topic Go down 
AuthorMessage
Slo_Mo_Shun
Tanabuso
Tanabuso


Posts : 92
Join date : 2014-01-12

PostSubject: Part number please   Wed Apr 02, 2014 11:01 am

Hi
  I ordered a new head cover for my 2013 GRiSO, the item arrive fine but it was only when I went to fit it I realized it was the wrong part. Sick as a parrot, I was certain that I had it right, I even went back to the website and checked that I was picking the part from the correct catalog, and I was. It was only when I went to several sites and noticed that those I looked at showed an incorrect part for my bike as well. Even my PDF parts manual shows an O ring type cover (for the spark plug tunnel) where mine is a rubber gasket. My vin prefix is ZGULSG.

Anyway, here are the parts, the new one is the top and my old one is the lower. You will notice that mine has a recess around the spark plug tunnel for a gasket of the same basic construction as the main outer gasket, where the new (incorrect) one is of the O ring type. I really need the part number for my old right hand head cover so that i can get this sorted.

All the best


[You must be registered and logged in to see this image.]
Back to top Go down
pauldaytona
Fra Cristoforo
Fra Cristoforo


Posts : 383
Join date : 2014-01-07

PostSubject: Re: Part number please   Wed Apr 02, 2014 1:05 pm

what part manual did you take, right should be ;
880124 RH Head cover

the o ring one is

872607 RH Head cover
Back to top Go down
http://www.fastguzzi.nl
Pete Roper
GRiSO
GRiSO


Posts : 3779
Join date : 2013-05-29
Age : 59

PostSubject: Re: Part number please   Wed Apr 02, 2014 1:41 pm

Can you not exchange it?

Pete
Back to top Go down
Slo_Mo_Shun
Tanabuso
Tanabuso


Posts : 92
Join date : 2014-01-12

PostSubject: Re: Part number please   Wed Apr 02, 2014 9:23 pm

pauldaytona wrote:
what part manual did you take, right should be ;
880124 RH Head cover

the o ring one is

872607 RH Head cover

Many thanks Paul, I used the parts manual on the suppliers website and also the one I downloaded along with a couple of other sites. Do you know of a source for downloading the correct one please?

Pete Roper wrote:
Can you not exchange it?

Pete

Yes, hopefully will Pete, Have emailed them still awaiting their reply.

All the best
Pete
Back to top Go down
beetle
GRiSO
GRiSO


Posts : 3968
Join date : 2013-09-30

PostSubject: Re: Part number please   Wed Apr 02, 2014 10:06 pm

Quote :
Do you know of a source for downloading the correct one please?

Here?   ghetto [You must be registered and logged in to see this link.]
Back to top Go down
pauldaytona
Fra Cristoforo
Fra Cristoforo


Posts : 383
Join date : 2014-01-07

PostSubject: Re: Part number please   Thu Apr 03, 2014 12:07 am

well there is a old and new version so depending on the year you should get the right one. In the pdf is a drawing showing the old and new version. Pick the right one. Only if they have an very old version they don't have the new parts in.

Do order 880127 with it, the gasket at the sparkplug
Back to top Go down
http://www.fastguzzi.nl
garyclem
Tanabuso
Tanabuso


Posts : 97
Join date : 2014-03-17
Age : 61

PostSubject: Re: Part number please   Thu Apr 03, 2014 9:29 am

I did the opposite and bought the later version (for the left side of my 2010), and like Slo mo shun didn't detect my error until I tried to fit it ............ so now I am the proud owner of a brand new, unused, spare left cover for a later model GRiSO and can't send it back cause I bought it on Ebay. BTW, the part numbers are on the inside of the covers .......... anybody need a 'later' left side ?
Back to top Go down
Slo_Mo_Shun
Tanabuso
Tanabuso


Posts : 92
Join date : 2014-01-12

PostSubject: Re: Part number please   Thu Apr 03, 2014 9:43 am

pauldaytona wrote:
well there is a old and new version so depending on the year you should get the right one. In the pdf is a drawing showing the old and new version. Pick the right one. Only if they have an very old version they don't have the new parts in.

Do order 880127 with it, the gasket at the sparkplug

I must blind or stupid but probably both, I cant find it in either of the parts manuals/catalogs in your link Paul.

garyclem wrote:
I did the opposite and bought the later version (for the left side of my 2010), and like Slo mo shun didn't detect my error until I tried to fit it ............ so now I am the proud owner of a brand new, unused, spare left cover for a later model GRiSO and can't send it back cause I bought it on Ebay. BTW, the part numbers are on the inside of the covers .......... anybody need a 'later' left side ?

Confirmed I am both blind and stupid I didnt think to look for the part number inside the cover, wa***r!!! didnt even notice on my own photo!!!!!

Many thanks for the help guys.
Back to top Go down
beetle
GRiSO
GRiSO


Posts : 3968
Join date : 2013-09-30

PostSubject: Re: Part number please   Thu Apr 03, 2014 12:50 pm

My apologies, the manual with the 2013 model isn't listed here. I'll ask Steak to post it.
Back to top Go down
Steak
L'Innominato
L'Innominato


Posts : 1905
Join date : 2013-05-28
Age : 51

PostSubject: Re: Part number please   Thu Apr 03, 2014 1:11 pm

beetle wrote:
My apologies, the manual with the 2013 model isn't listed here. I'll ask Steak to post it.

Here it is: GRiSO V 8V 1200 2007-2013 Spare Parts Catalogue

It's posted in the [You must be registered and logged in to see this link.] section of the Members Only forum.

--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
[You must be registered and logged in to see this image.]

2012 MOTO GUZZI GRiSO 1200SE

2013 MOTO GUZZI STELVIO 1200NTX - Orange Blossom Special
Back to top Go down
http://www.grisoghetto.com
pauldaytona
Fra Cristoforo
Fra Cristoforo


Posts : 383
Join date : 2014-01-07

PostSubject: Re: Part number please   Thu Apr 03, 2014 2:44 pm

one thing to keep in mind: the parts catalogs in pdf don't show if parts are replaced with other numbers. They show the original part numbers. So if you get the part that is in the pdf, it could be surpassed by something else. Only who can look inside the online catalog can see latest part numbers. That is dealers and serviceagents.
Back to top Go down
http://www.fastguzzi.nl
Slo_Mo_Shun
Tanabuso
Tanabuso


Posts : 92
Join date : 2014-01-12

PostSubject: Re: Part number please   Thu Apr 03, 2014 9:16 pm

Many thanks guys, I really appreciate the help.
What a great forum this is, not only rapid help from the users but resources posted as well.

All the best
Pete
Back to top Go down
Pete Roper
GRiSO
GRiSO


Posts : 3779
Join date : 2013-05-29
Age : 59

PostSubject: Re: Part number please   Thu Apr 03, 2014 10:30 pm

If you have any doubts please feel free to ask me. I am a service agent and if you are worried about interchangeability I can always loom it up. I would obviously prefer it if you are in Oz you buy the bloody bits from me as this is how I make my living but elsewhere? No worries.

Incidentally if you can't return the rocker cover I will happily buy it at trade price. Sorry of that seems mean but obviously its how I make my living.

Pete
Back to top Go down
Slo_Mo_Shun
Tanabuso
Tanabuso


Posts : 92
Join date : 2014-01-12

PostSubject: Re: Part number please   Fri Apr 04, 2014 7:03 am

Thanks Pete, and I really appreciate the offer, unfortunately I am in the UK but certainly if I were in Australia I would be giving you a call.

All the best
Pete
Back to top Go down
garyclem
Tanabuso
Tanabuso


Posts : 97
Join date : 2014-03-17
Age : 61

PostSubject: Re: Part number please   Fri Apr 04, 2014 3:29 pm

Pete Roper wrote:
if you can't return the rocker cover I will happily buy it at trade price

Pete, I'll bring the left cover (880123) with me next Saturday and will happily accept whatever you offer, thanks.
Back to top Go down
Pete Roper
GRiSO
GRiSO


Posts : 3779
Join date : 2013-05-29
Age : 59

PostSubject: Re: Part number please   Fri Apr 04, 2014 5:23 pm

Do you have the correct one yet? If not we can just swap it. I have a lefty with o-ring seal in stock.

$236+ is what one of the new type costs me from the importer.

Pete
Back to top Go down
garyclem
Tanabuso
Tanabuso


Posts : 97
Join date : 2014-03-17
Age : 61

PostSubject: Re: Part number please   Fri Apr 04, 2014 6:18 pm

many thanks Pete, that is very generous , but I had already purchased the correct earlier 'lefty' from Motociclo (for similar $$$) prior to this thread getting started.......... guess I should have asked here in the first place. 

Pete, I'd be happy with a way lot less $$ for the unused later cover that I bought by mistake? Anyway we can work something out on the weekend.

kind regards
Back to top Go down
Sponsored content




PostSubject: Re: Part number please   Today at 12:44 am

Back to top Go down
 
Part number please
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
GRiSO ghetto :: The Ghetto :: GRiSOLOGY-
Jump to: