Lowering front end

Carlotto Posts : 32 Join date : 2018-04-20

Well, I searched a few different word combinations, but I can’t seem to find a topic in lowering the front end of the GRiSO for better handling. My question is, how far have you lowered the front end?

GRiSO Capo Posts : 1449 Join date : 2016-01-25 Age : 69

5 rings with standard suspension (SIdrat settings)
It is still rock solid at all speeds but turns in better

Grignapoco Posts : 173 Join date : 2021-03-24

lcjohnny wrote:: 5 rings with standard suspension (SIdrat settings)
It is still rock solid at all speeds but turns in better

Are you talking about these settings:

Front
compression: 1/4 T (stock: 1 T)
rebound: 2 1/4 T (stock: 1.5 T)
preload: 5th mark (stock: 4th)

Rear
compression: 1/4 T (stock: 1.5 T)
rebound: 40 clicks (stock: 17)

[You must be registered and logged in to see this link.]

Tiradritto Posts : 377 Join date : 2019-12-05 Age : 55

All the way down - 6 rings showing (I think)

GRiSO Capo Posts : 1449 Join date : 2016-01-25 Age : 69

Hi evilgarfield
That is the settings I am using (Although I think that Sidrat did post another set of settings)

But i have also just wound the spring preload nut right down tight to get the rider-sag down to 30% of travel - about 36mm in my case

sorry i did not include the link

Jon

» LOWERING MY GRiSO!
» foot control lowering
» Lowering of pillion pegs
» Lowering Link for Guzzi GRiSO
» Looking for a Foot Peg lowering kit for 2007 GRiSO 1100