GRiSO ghetto
Would you like to react to this message? Create an account in a few clicks or log in to continue.


12425 - Established June, 2013 - all GRiSO, all the time...
 
HomeRegisterLog in

 

 Rear Sachs shock

Go down 
+4
Hacky
Grisodude
guzziownr
stevie1
8 posters
AuthorMessage
stevie1
Carlotto
Carlotto
stevie1


Posts : 44
Join date : 2014-05-18

Rear Sachs shock Empty
PostSubject: Rear Sachs shock   Rear Sachs shock Icon_minitime1Tue Jun 03, 2014 7:46 pm

Reading through posts, it appears a viable option to replace the stock spring with an Ohlins 1093 around 800 pounds/inch, I'm ok with stock spring but my wife is most unhappy with the harsh suspension.
Does anyone have a write up to do this, or is it beyond the home mechanic without a full workshop!???.
I'm not after track day performance, just a bit more comfort for my wife.
Thanks
Stevie.


Last edited by stevie1 on Wed Jun 04, 2014 10:56 am; edited 1 time in total (Reason for editing : different info wanted)
Back to top Go down
guzziownr
Nibbio
Nibbio
guzziownr


Posts : 609
Join date : 2013-12-24

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Tue Jun 03, 2014 10:29 pm

I had a local shop swap the spring as I do not have a spring compressor or the desire to MacGyver one out of innertubes and scrap lumber.

I did the de and re-installation with nothing more exotic than allen wrenches and the usual metric suspects from the toolbox.

Battery tray and muffler came off, the airbox was tipped up but not totally removed. It took longer than it should have but that is the way of it when I am in the garage.
Back to top Go down
stevie1
Carlotto
Carlotto
stevie1


Posts : 44
Join date : 2014-05-18

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Tue Jun 03, 2014 11:47 pm

Shock removal no problem, removed it last week to grease swing arm & shock bearings, spring compressors no problem, im actually after a method to do the spring changeout, or advice to practicality.
Thanks
Stevie
Back to top Go down
stevie1
Carlotto
Carlotto
stevie1


Posts : 44
Join date : 2014-05-18

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Wed Jun 04, 2014 10:54 am

Can anyone confirm spring lengths please, i have read in this site that an Ohlins spring 1091 or 1093 are suitable replacements, i see Guzziownr has replaced his stock spring with a 1092 (in picture he posted), i have looked at an Ohlins chart-this gives the following-1093=150mm, 1091=160mm 1092-170mm, i thought the 1093 would be longest??, but the chart has it as the shortest of the 3, i suspect the chart may be wrong??.
Also what is the actual lenght of the stock rear spring, i cannot find it written anywhere.
Many thanks
Stevie
Back to top Go down
Grisodude
Tiradritto
Tiradritto
Grisodude


Posts : 363
Join date : 2013-07-02
Age : 63

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Wed Jun 04, 2014 11:49 am

Hi stevie1
I just had my shock rebuilt, the spring number as I see it is 01091-39-110.
Weight was 85 Kg for wife geared up and 90 kg for me + 20 kg for gear.
Re-valve as well (racetech)
I also made some rear pegs which help my wife move around easier.
See my post GRiSO rear pegs in GRiSO inspiration.

Harry
Back to top Go down
guzziownr
Nibbio
Nibbio
guzziownr


Posts : 609
Join date : 2013-12-24

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Wed Jun 04, 2014 3:23 pm

The 1092 was not quite long enough and needed to be snugged down with the adjuster.  It was cheap and available so in it went.

I am 102 Kilos in my Spongebob p.j.s and my wife goes on the GRiSO only under duress.
Back to top Go down
stevie1
Carlotto
Carlotto
stevie1


Posts : 44
Join date : 2014-05-18

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Jun 05, 2014 8:57 am

Thanks form the replies gents, out of interest, how did the pillion passengers find the suspension after the respringing??
Thanks
Stevie
Back to top Go down
Grisodude
Tiradritto
Tiradritto
Grisodude


Posts : 363
Join date : 2013-07-02
Age : 63

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Mon Jun 09, 2014 9:58 am

Stevie
Leanne and I liked it as the bottoming out of the shock took away the jarring in our backs.
All up it's a good investment.

Harry
Back to top Go down
stevie1
Carlotto
Carlotto
stevie1


Posts : 44
Join date : 2014-05-18

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Mon Jun 09, 2014 4:34 pm

Thanks Harry, its on the to do list, once i locate a spring.
Back to top Go down
Hacky
Grignapoco
Grignapoco
Hacky


Posts : 124
Join date : 2016-01-07

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Sun Mar 13, 2016 12:40 am

Grisodude,
In 2014 how much did the work on your shock cost and where did you have it done at?
Back to top Go down
guzziownr
Nibbio
Nibbio
guzziownr


Posts : 609
Join date : 2013-12-24

Rear Sachs shock Empty
PostSubject: Stelvio shock   Rear Sachs shock Icon_minitime1Sun Mar 13, 2016 1:28 am

I have a Stelvio shock in my GRiSO. Better spring and more travel. See if Mr. Roper has the one from the wreck. DW
Back to top Go down
Hacky
Grignapoco
Grignapoco
Hacky


Posts : 124
Join date : 2016-01-07

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Sun Mar 13, 2016 6:11 am

Think I read under another thread that the shock from the wreck has been sold or at least promised to another forum member. Is that the case Pete?

Regardless details on the Ohlins upgrade still interest me Grisodude.
Back to top Go down
Pete Roper
GRiSO Capo
GRiSO Capo
Pete Roper


Posts : 10371
Join date : 2013-05-30
Age : 67

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Sun Mar 13, 2016 9:01 am

Not that I'm aware but if that is the case I'm sorry. Nobody has picked it up yet..... Nor has anybody given me any money.

I'm basically trying to help people out with their experiments because I can. This isn't part of my 'Business', I won't be getting rich by selling off bits of wrecked out shit. I'm sure that there are people who think my business is a licence to print money? If so anyone who wants to buy it can. Make an offer.

Pete
Back to top Go down
Oz1200Guzzi
Don Abbondio
Don Abbondio
Oz1200Guzzi


Posts : 6080
Join date : 2014-03-13
Age : 69

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Sun Mar 13, 2016 9:03 am

commonly called "first in, best dressed"
Back to top Go down
Brent S
Biondino
Biondino
Brent S


Posts : 268
Join date : 2015-10-20
Age : 51

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Wed Mar 23, 2016 11:50 pm

Gents, if I could jump onto the tail of this thread for a moment.......

Just had the rear sag measurements taken on my GRiSO at a local workshop this morning. Took the bloke about 30 seconds to say that the spring is too soft. Sag is around 35mm even with the factory-set preload wound down a long way. I was told that if the preload is tightened further, it may help with the sag, but the ride may get worse. I'm 78kg weight, so god knows how bad the stock Spring is for the larger lads amongst us.

Does anybody have a recommendation for a spring brand and specification that may work. Needs to be available in Australia. As much as this topic seems to pop up, I've had trouble finding recommendations from people who have swapped out their rear spring and who are happy with the result.

Thanks.
Back to top Go down
Guest
Guest
avatar



Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Mar 24, 2016 12:28 am

I would question those results as in most suspension is built around rider weight of 75 -80kg.
Was the 35mm static sag or rider sag? How much pre-load (in mm) has currently been placed on the stock spring? It will need to be removed first to measure this.

Go to your local suspension guru in Melb, there must be experts there.
Ohlin, Eibach, Penske springs approx $200. One of the brands will have a spring with correct free length and internal diameter.

From memory, stock GRiSO spring is rated at 9.6 kg.

But while you have the shock out for spring replacement, have the guru re-vlave it, approx $350.
This will net you the best value for money as the stock Sachs suffers from hydraulic lock, as in, it cannot flow oil fast enough for "hi-speed" compression damping (big/harsh bumps). The adjuster on the shock primarily controls low speed damping, or squat in corners.

I used these guys years ago for my Cali Stone.
[You must be registered and logged in to see this link.]

or .... [You must be registered and logged in to see this link.] have a good rep
Back to top Go down
Brent S
Biondino
Biondino
Brent S


Posts : 268
Join date : 2015-10-20
Age : 51

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Mar 24, 2016 1:29 am

Ghezzi, I thought it was odd too. The measure was the difference in height between the suspension at almost full travel (off the bike with me lifting the rear as much as I could) and then with me on the bike in normal riding position.

No idea how much exact pre-load had been dialled-in as the spring would have to be taken out to do this, and to be honest, the bloke assisting me didn't appear to have the time nor inclination to do that there on the spot.
Back to top Go down
Guest
Guest
avatar



Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Mar 24, 2016 2:23 am

Well there you go, he only did half the job and will sell you parts and labour based on his mis-information.

A. Measure topped out, or fully extended.
B. Measure static sag, the suspension at rest under the bikes own weight.
C. Measure rider sag, you on the bike in full battle dress in your normal riding position.

The following numbers may not be gospel, just an example for the explanation.
If A minus B = 10 mm (was considered to be normal)
If C = 30% of maximum rear wheel travel, then you have the correct spring and sag set up.

30% if GRiSO has 120 mm rear wheel travel = 36 mm. You are on the money here.

Now here is my theory.
If A minus B = Zero (or significantly lower than 10 mm) it would indicate the spring is too soft and heaps of pre-load has been wound on to maintain a rider sag near to our theoretic ideal of 36mm.

If A minus B = 25 mm (or significantly higher than 10 mm) it would indicate the spring is too hard and pre-load has been wound off, so it settles the the right height when you climb aboard.

When a spring is fitted to the shock, a degree of pre-load needs to be added to keep it all together. If the spring could float things like spring retainers would fall out.
I would suggest the standard Sachs shocks are a parts bin special for the Guzzi and a short spring has been used, hence the appearance of lots of pre-load on your spring. Bella was the same.

Compression damping re-valving will get you the best bang for buck with the Sachs, if you want better sex Sachs, buy a new shock.
Back to top Go down
Brent S
Biondino
Biondino
Brent S


Posts : 268
Join date : 2015-10-20
Age : 51

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Mar 24, 2016 3:34 am

Ghezzi, thanks. One thing I did notice was that when I attempted to lift the rear end to get to the top of the suspension travel, the thing barely moved. It was like there was zero 'upwards' travel. Would support the commonly held view that the standard Spring is too soft and has a heap of pre-load wound in.
Back to top Go down
Guest
Guest
avatar



Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Mar 24, 2016 3:58 am

We are only talking 1/4" of vertical movement of the chassis/seat measured directly above the axle.
Back to top Go down
Brent S
Biondino
Biondino
Brent S


Posts : 268
Join date : 2015-10-20
Age : 51

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Mar 24, 2016 4:43 am

One of those links you sent me (ProMech) is only around 25 minutes ride from where I live, so I might give those guys a try.

Thanks.
Back to top Go down
guzziownr
Nibbio
Nibbio
guzziownr


Posts : 609
Join date : 2013-12-24

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Mar 24, 2016 2:26 pm

I really like my Stelvio shock...
Back to top Go down
Ralf z
Tiradritto
Tiradritto
Ralf z


Posts : 328
Join date : 2014-01-02
Age : 56

Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1Thu Mar 24, 2016 11:26 pm

Am I thinking the only Avantage for the Stelvio shock in a GRiSO is the heavier spring and length?
As I thought it only has rebound adjustment and preload no compression adjustment and no extra reservoir like the GRiSO shock
Back to top Go down
Sponsored content





Rear Sachs shock Empty
PostSubject: Re: Rear Sachs shock   Rear Sachs shock Icon_minitime1

Back to top Go down
 
Rear Sachs shock
Back to top 
Page 1 of 1
 Similar topics
-
» Sachs rear shock
» Reworking Sachs shock ...
» Anyone have a stock Sachs shock sitting around??
» Standard (Sachs) Rear Spring length vs Wilbers, Ohlins etc
» Rear Shock Change.

Permissions in this forum:You cannot reply to topics in this forum
GRiSO ghetto :: The Ghetto :: GRiSOLOGY-
Jump to: