Don't know if this has been written up before.
Needed to remove the inner section of the bodywork wings beside the fuel tank.
After some trial and error I have found the best way to remove the metal clips that are used to retain the inner section of the wing, including the metal mesh.[You must be registered and logged in to see this image.]
The plastic mounting prongs are fairly robust but can break if you are heavy handed trying to remove the metal retaining clip.
How do I know this, well you've already figured that out, a bit of plastic welding should sort it.
After proding and pushing it dawned on me to use a heat gun to soften the plastic so the metal clip can be dislodged.
While warming the prong and working under the clip with a small bladed screw driver, I was able to dislodge the clips relatively easily but slowly without further damage.[You must be registered and logged in to see this image.]
Once done it was easy to separate the the pieces.[You must be registered and logged in to see this image.]
When re assembling you can use an 8mm socket to easily knock the securing clip on to the plastic prong to lock the pieces together.[You must be registered and logged in to see this image.]