Bungee Bobbins

My GRiSO never came with those bungee bobbins, not that I minded too much as gives a cleaner line.
Now am more of it's an item thats missing. So sourced some £12
I notice there are 4 threaded holes in the frame for attachment and the bobbins I assume are threaded too.
So begs the question do they attached with a bolt through the frame or were they fitted with some kind threaded adaptor?
Knew I should have asked that question but time was pressing and people want to go home and chill

[You must be registered and logged in to see this image.]

Hey Paul,
The bolts are M8, 30mm thread length/35mm total length, 1.25 metric pitch (the pitch tool is double sided & says metric on other side !) with 'special wide countersink' head (15mm diameter with allen key drive).

[You must be registered and logged in to see this image.]

TLM have them in stock

[You must be registered and logged in to see this image.]

Or trawl through UK fastener websites for similar

Can go expensive ...Ti to save weight  [You must be registered and logged in to see this image.]

So they do bolt through the frame, great thanx guys

Hi Paul
You need to be aware that if you actually use those bobbins it is very hard to stop the bungees rubbing on the taipiece

lcjohnny wrote:

Hi Paul
You need to be aware that if you actually use those bobbins it is very hard to stop the bungees rubbing on the taipiece

Nah prob wont use them, just el cheapo resto, less than £20 to put back something that was missing, though forewarned is forearmed thanx bud

I've used these in various spots on my Stelvio.
Stainless Steel Eye Nuts.

In conjunction with the excellent Rox-Straps, they're perfect for strapping on pretty much anything.
Available in all the useful metric sizes, M5~M6~M8~M10.

[You must be registered and logged in to see this image.]