GuzziDiag and mapping a Breva 1100 with a GRiSO 1100
3 posters
Author
Message
frizzit Don Abbondio
Posts : 7 Join date : 2015-07-05
Subject: GuzziDiag and mapping a Breva 1100 with a GRiSO 1100 Sun Jul 19, 2015 11:33 am
I was wondering if anyone here has or knows someone who has installed a GRiSO 1100 2V map in a Breva 1100 2V. I know the intake and exhaust are much different between the models, but the engine is basically the same. I just purchased the Breva last year with ~3k and I'm looking to make it run a bit better. I received some maps from a generous user on another forum and it was suggested to try it, I just don't want to muck anything up. So I'm cross posting on boards for opinions.
TIA
voulga77 Don Abbondio
Posts : 143 Join date : 2014-08-26
Subject: Re: GuzziDiag and mapping a Breva 1100 with a GRiSO 1100 Tue Jul 21, 2015 2:57 am
Why put a GRiSO map when there's a breva map available... Mark has developed one for a full stock Breva 1100. PM me your email so I can sand it to you.
xavier849 likes this post
frizzit Don Abbondio
Posts : 7 Join date : 2015-07-05
Subject: Re: GuzziDiag and mapping a Breva 1100 with a GRiSO 1100 Tue Jul 21, 2015 4:22 am
PM Sent Thank you!
I was actually planning on working out my own map after I found a recording software on the android market was compatible with my $10 OBD2 to Bluetooth converter.
. [You must be registered and logged in to see this image.] . In GRiSO we trust! .
voulga77 Don Abbondio
Posts : 143 Join date : 2014-08-26
Subject: Re: GuzziDiag and mapping a Breva 1100 with a GRiSO 1100 Tue Jul 21, 2015 5:08 am
Hello Mark, let me ask you a question.
What is the value for Base Stepper Steps on this map?
For stock map is 80, for BRV12 release map (which is still installed on my bike) is 100. I am asking because my bike is tuned based on this value, 100.
frizzit Don Abbondio
Posts : 7 Join date : 2015-07-05
Subject: Re: GuzziDiag and mapping a Breva 1100 with a GRiSO 1100 Tue Jul 21, 2015 8:49 pm
Well that is a bit disheartening, I would like to know the hows and whys of the map. Is there a thread for this work in progress anywhere?
beetle GRiSO Capo
Posts : 10180 Join date : 2013-09-30
Subject: Re: GuzziDiag and mapping a Breva 1100 with a GRiSO 1100 Tue Jul 21, 2015 10:16 pm
Well, I've had no feedback from anyone using the map, so no reason to continue work on It.
. [You must be registered and logged in to see this image.] . In GRiSO we trust! .
frizzit Don Abbondio
Posts : 7 Join date : 2015-07-05
Subject: Re: GuzziDiag and mapping a Breva 1100 with a GRiSO 1100 Thu Jul 23, 2015 6:45 pm
I suppose that would do it. I also suppose that if you wanted me to have the map specifically you would have offered it up directly. Since it is a work in progress, how can I help? I'm learning to use the logging software I have, though it is relatively slow sampling. I do not have the LM2 system that everyone is keen about, and I'm not looking to spend to much money. I will probably replace the cat with a crossover pipe at some point. It would probably be beneficial to get a crossover with an O2 sensor bung for each cylinder so one could determine how each cylinder is working. That might be a possibility, though I'd rather spend the $800 on a crossover and Mistral pipe.
beetle GRiSO Capo
Posts : 10180 Join date : 2013-09-30
Subject: Re: GuzziDiag and mapping a Breva 1100 with a GRiSO 1100 Thu Jul 23, 2015 7:07 pm
PM me your email address and I'll send it to you. Give it a try and tell me if its good bad or the same.