Turn signals

My 07 front turn signals are starting to crumble which is common. I'm curious about all the led options and if its just plug and play as the flashers are dash controled. My old calvin had leds with the led flasher thats the only experience I've got

I do not think they are plug & play. You may need to wire in a diode. Some one here has done this, try a search for results.

Lots of links in Ghetto eg [You must be registered and logged in to see this link.]

Generally you might have to put some Resistors in (they came with Rizomas) although some brands seem to work OK (presumably they have built in resistors)

Thanks I'll be looking for suitable units ,for the time being the flexible stems are stabilized witj heavy duty electric tape

Tim,
I replaced my front ones with an LED pair from a newer MG model that I found on the AF1 website. With a little modifying they fit the existing stalks. For the rear I used some small ones from Morimoto. The front ones didn’t require resistors. The morimoto came with resistors built in. Both required cutting and splicing. I can send pictures if your interested but you can probably find some of this by doing a search like Paul mentioned. Good luck.

Thanks I've also seen modifying aprilia stalks. I was wondering about the resistors being nessesary but it seems all mention them I will be shopping around ,

Don't forget to measure in case you have/ever want C-bow or similar luggage carriers. The original indicators touched the C-bow when loaded & even after I tail-tidied the back end indicators I had to avoid long ones....

[You must be registered and logged in to see this image.]

Thanks I'll keep that in mind